Kapower

Transparent LED film · installed on the glass façade

Your façade
becomes a screen

The image is emitted by the glass; wherever it is black, the pane stays transparent.

Simulation

Swipe up to enter

Transparent LED film · The essentials

The glass displays
The view remains

  • — A 2.5 mm film bonded to the inner face of the glass.
  • — The black areas of the image stay transparent: you can always see inside.
  • — Up to 4,000 nits: highly readable in the shade, in the evening and at night. In direct sunlight, readability depends on which way the façade faces.

Our models · in the mall

Choose the ideal resolution for your project

Specifications to be confirmed from our data sheets

The number after the “P” is the gap between two LEDs, in millimeters. Small pitch: a finer image, to be seen up close. Large pitch: more transparency, to be read from further away. Choose a model: the view moves to its recommended distance. The whole window becomes a screen — wherever the image is black, the LEDs are off and you see the shop.

You are ≈ 6 m away · P6

Simulation

Choose a model: the view steps back to its recommended distance

10 cm up close

P6

Indicative

Luxury shop windows, showrooms, lobbies

The finest image, for close-up viewing.

1 LED every ≈ 6 mm

Pitch
≈ 6 mm
Density
≈ 27,778 LED/m²
Recommended distance
≈ from 6 m

Indicative values (nominal pitch, theoretical density, distance based on the usual rule “1 mm of pitch ≈ 1 m”) and schematic rendering. They will be replaced by the specifications in KAPOWER’s data sheets — our experts will recommend the right model for your window or façade.

Our projects

Installations completed by KAPOWER

KAPOWER Morocco presentation

Contact

Your project
starts here

Set up my project

Solution

Project type

Estimated glass area

12 m²

An estimate is enough: our experts measure on site.

Quotes on WhatsApp: +212 664 047 224

✓Done: keep scrolling ↓